Update Cisco CCNP 300-135 TSHOOT exam latest dumps
Passtcert is a website to improve the pass rate of Cisco certification 300-135 exam. Senior IT experts in the Passtcert constantly developed a variety of successful programs of passing Cisco certification 300-135 exam, so the results of their research can 100% guarantee you Cisco certification 300-135 exam for one time. Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps are very effective and many people who have passed a number of IT certification exams used the practice questions and answers provided by Passtcert.
Share some CCNP 300-135 exam questions and answers below.
Ticket 5 R1ACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
! interface Serial0/0/0/1
description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in
ip nat outside
ip virtual-reassembly
ntp brasdcast client
net broadcast key 1
no cdp enable
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any
ip access-list edge_security permit ip host 209.65.200.241 any
On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped.
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately)
A. MTU does not match
B. Area 0 need to exist for OSPF to function properly
C. Gre tunnel destination is not reachable through tunnel
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡±
E. ospf routes contains the route to tunnel destination
Answer: C
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
The tunnel between R1 and R3 is not coming up. Which two statements are true? (Choose two)
(Topology with a GRE tunnel and the outputs provided are show ip int brief and tunnel source and destination)
A. Tunnel source int Eth0/0 is down
B. No route from R1 to R3 loopback0 (tunnel destination)
C. source and destination not in same subnet
D. http://bbs.hh010.com/
Answer: AB
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
What is the MTU¡¯s size in a GRE tunnel?
A. 1630
B. 1476
C. 1500
D. 1900
Answer: B
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC
And Passtcert provide a wide coverage of the content of the exam and convenience for many of the candidates participating in the IT certification exams except the accuracy rate of 100%. It can give you 100% confidence and make you feel at ease to take the exam.Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps is no other sites in the world can match. Of course, this is not only the problem of quality, it goes without saying that our quality is certainly the best.
Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps are very effective and many people who have passed a number of IT certification exams used the practice questions and answers provided by Passtcert. Some of them who have passed the Cisco certification 300-135 exam also use Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps. Selecting Passtcert means choosing a success. Passtcert is the best catalyst to help IT personage be successful. Many people who have passed some IT related certification exams used our Passtcert training tool.
Related article: http://840-425-dumps.blogspot.com/2017/09/update-troubleshooting-and-maintaining.html
Share some CCNP 300-135 exam questions and answers below.
Ticket 5 R1ACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
! interface Serial0/0/0/1
description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in
ip nat outside
ip virtual-reassembly
ntp brasdcast client
net broadcast key 1
no cdp enable
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any
ip access-list edge_security permit ip host 209.65.200.241 any
On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped.
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately)
A. MTU does not match
B. Area 0 need to exist for OSPF to function properly
C. Gre tunnel destination is not reachable through tunnel
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡±
E. ospf routes contains the route to tunnel destination
Answer: C
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
The tunnel between R1 and R3 is not coming up. Which two statements are true? (Choose two)
(Topology with a GRE tunnel and the outputs provided are show ip int brief and tunnel source and destination)
A. Tunnel source int Eth0/0 is down
B. No route from R1 to R3 loopback0 (tunnel destination)
C. source and destination not in same subnet
D. http://bbs.hh010.com/
Answer: AB
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
What is the MTU¡¯s size in a GRE tunnel?
A. 1630
B. 1476
C. 1500
D. 1900
Answer: B
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC
And Passtcert provide a wide coverage of the content of the exam and convenience for many of the candidates participating in the IT certification exams except the accuracy rate of 100%. It can give you 100% confidence and make you feel at ease to take the exam.Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps is no other sites in the world can match. Of course, this is not only the problem of quality, it goes without saying that our quality is certainly the best.
Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps are very effective and many people who have passed a number of IT certification exams used the practice questions and answers provided by Passtcert. Some of them who have passed the Cisco certification 300-135 exam also use Passtcert Cisco CCNP 300-135 TSHOOT exam latest dumps. Selecting Passtcert means choosing a success. Passtcert is the best catalyst to help IT personage be successful. Many people who have passed some IT related certification exams used our Passtcert training tool.Related article: http://840-425-dumps.blogspot.com/2017/09/update-troubleshooting-and-maintaining.html
After passing CCNA Routing and Switching Certification I decided to attempt Trouble Shooting and Maintaining Cisco IP Networks (TSHOOT). I knew that CISCO Certification is not a piece of cake that’s why I needed authentic and valid source of study. I passed my previous exam by getting source full material from Realexamdumps.com. So without waiting my time and money I downloaded 300-135 Exam Dumps. I prepared myself through online test practicing material and attempted the final exam and I got cleared my exam in first attempt. I’m really in debt to expert’s hard work that provided such advantageous study guide.
ReplyDelete