Update Cisco 400-101 simulation questions
If you have decided to participate in the Cisco 400-101 exam, Passtcert is here. We can help you achieve your goals. We know that you need to pass your Cisco 400-101 exam, we promise that provide high quality Cisco 400-101 simulation questions for you, Which can help you through 400-101 CCIE Routing and Switching Written Exam exam.In real life, every great career must have the confidence to take the first step. Passtcert is the only provider of Cisco 400-101 simulation questions that can help you to pass the exam. Our Cisco 400-101 simulation questions, including questions and answers, the pass rate can reach 100%.
Let me be clear here a core value problem of Passtcert. All Cisco exams are very important. In this era of rapid development of information technology, Passtcert Cisco 400-101 simulation questions provided by one of them. Why do most people choose Passtcert? This is because the exam information provided by Passtcert will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents.
Share some CCIE 400-101 exam questions and answers below.
What are two reasons for an OSPF neighbor relationship to be stuck in exstart/exchange state? (Choose two)
A. Both routers have the same router ID.
B. There is an area ID mismatch
C. There is an MTU mismatch
D. There is an authentication mismatch
E. Both routers have the same OSPF process ID
Answer: A, C
Which three service offer VLAN transparency for WAN Ethernet services? (Choose three)
A. ERMS
B. EPL
C. ERS
D. MPLS
E. EMS
F. EWS
Answer: BEF
Which IPv6 migration method allows IPv4-only devices to communicate with IPv6-only devices?
A. GRE tunnel
B. dual stack
C. ISATAP tunnel
D. NAT64
Answer: D
Which two statements about TCP MSS are true? (Choose two)
A. It operates at Layer 3.
B. It sets the maximum amount of data that a host sends in an individual datagram.
C. It sets the minimum amount of data that a host accepts in an individual datagram.
D. The two endpoints in a TCP connection report their MSS values to one another.
E. MSS values are sent in TCP SYN packets.
Answer: D, E
Refer to the exhibit.
Which two conclusions can you draw from this output (choose two)
A. The device at the 192.168.5.119 routing table has an APR entry for the device at 10.9.132.254.
B. The packet was source-routed.
C. The device at 192.168.5.119 is on the same subnet as the next hop for the device at 10.9.132.254.
D. The device that produced the output uses different interfaces to send and receive traffic to and from the device at 10.9.132.254
E. The device that produced the output uses the same interface to send and receive traffic to and from the device at 10.9.132.254
Answer: C, E
Which mechanism does GET VPN use to preserve IP header information?
A. IPsec tunnel mode
B. GRE
C. MPLS
D. IPsec transport mode
Answer: A
Refer to the exhibit.
Which statement about the R1 multicast network environment is true?
A. RPF builds the topology using the unicast data for source address 10.1.108.10.
B. A static mroute configured to point multicast traffic for 10.30.30.32 through Ethernet 1/0.
C. RPF uses the OSPF 100 table for source address 10.1.108.10.
D. The default mroute uses Tunnel 10 as the exit interface for 10.1.108.10.
Answer: D
Which feature can be used to block traffic from one host to another within one VLAN on a Layer 2 switch?
A. port security
B. dot1x
C. access list
D. protected ports
Answer: D
Drag and Drop the NAT elements on the left into the correct sequential on the right?
Answer:
Drag each OSPFv2 SA parameter on the left to its corresponding description on the right?
Answer:
Passtcert can provide the leading Cisco training techniques to help you pass CCIE certification 400-101 exam.Passtcert Cisco 400-101 simulation questions are made in accordance with the latest syllabus and the actual Cisco 400-101 certification exam. We constantly upgrade our Cisco 400-101 simulation questions, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam.
Let me be clear here a core value problem of Passtcert. All Cisco exams are very important. In this era of rapid development of information technology, Passtcert Cisco 400-101 simulation questions provided by one of them. Why do most people choose Passtcert? This is because the exam information provided by Passtcert will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents.
Share some CCIE 400-101 exam questions and answers below.
What are two reasons for an OSPF neighbor relationship to be stuck in exstart/exchange state? (Choose two)
A. Both routers have the same router ID.
B. There is an area ID mismatch
C. There is an MTU mismatch
D. There is an authentication mismatch
E. Both routers have the same OSPF process ID
Answer: A, C
Which three service offer VLAN transparency for WAN Ethernet services? (Choose three)
A. ERMS
B. EPL
C. ERS
D. MPLS
E. EMS
F. EWS
Answer: BEF
Which IPv6 migration method allows IPv4-only devices to communicate with IPv6-only devices?
A. GRE tunnel
B. dual stack
C. ISATAP tunnel
D. NAT64
Answer: D
Which two statements about TCP MSS are true? (Choose two)
A. It operates at Layer 3.
B. It sets the maximum amount of data that a host sends in an individual datagram.
C. It sets the minimum amount of data that a host accepts in an individual datagram.
D. The two endpoints in a TCP connection report their MSS values to one another.
E. MSS values are sent in TCP SYN packets.
Answer: D, E
Refer to the exhibit.
Which two conclusions can you draw from this output (choose two)
A. The device at the 192.168.5.119 routing table has an APR entry for the device at 10.9.132.254.
B. The packet was source-routed.
C. The device at 192.168.5.119 is on the same subnet as the next hop for the device at 10.9.132.254.
D. The device that produced the output uses different interfaces to send and receive traffic to and from the device at 10.9.132.254
E. The device that produced the output uses the same interface to send and receive traffic to and from the device at 10.9.132.254
Answer: C, E
Which mechanism does GET VPN use to preserve IP header information?
A. IPsec tunnel mode
B. GRE
C. MPLS
D. IPsec transport mode
Answer: A
Refer to the exhibit.
Which statement about the R1 multicast network environment is true?
A. RPF builds the topology using the unicast data for source address 10.1.108.10.
B. A static mroute configured to point multicast traffic for 10.30.30.32 through Ethernet 1/0.
C. RPF uses the OSPF 100 table for source address 10.1.108.10.
D. The default mroute uses Tunnel 10 as the exit interface for 10.1.108.10.
Answer: D
Which feature can be used to block traffic from one host to another within one VLAN on a Layer 2 switch?
A. port security
B. dot1x
C. access list
D. protected ports
Answer: D
Drag and Drop the NAT elements on the left into the correct sequential on the right?
Answer:
Drag each OSPFv2 SA parameter on the left to its corresponding description on the right?
Answer:
Passtcert can provide the leading Cisco training techniques to help you pass CCIE certification 400-101 exam.Passtcert Cisco 400-101 simulation questions are made in accordance with the latest syllabus and the actual Cisco 400-101 certification exam. We constantly upgrade our Cisco 400-101 simulation questions, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam.
Comments
Post a Comment